Cantilever Chair: Seating Without Rear Legs

A side-view product photo of a cantilever chair. The structure is formed by a continuous bend of a single 25mm diameter stainless steel tube: extending forward from the ground into a sled-like base, bending upwards to form the front legs, then horizontally to support the seat, and finally curving upwards to form the backrest frame—the tube is unbroken throughout, with no rear legs, so there is a slight springiness when seated. The seat and backrest are made of leather or woven cane stretched over the frame, secured to the steel tube with exposed screws on both sides. The steel tube is polished, reflecting the lines of the environment. Pure white background, direct side view, emphasizing the continuous line. Avoid: adding a fourth leg, segmented welded steel tube, thick padded seat, photographing at a 45-degree angle that obscures the cantilever design.

Translated from Chinese by AI.

一張懸臂椅的側視產品照,結構是一根直徑 25mm 的不鏽鋼管連續彎折而成:從地面向前延伸成雪橇狀的底,向上折成前腳,再水平轉為座面的支撐,最後向上彎成椅背的框——全程沒有斷開,也沒有後腳,所以坐上去時會有輕微的彈性。座面與椅背是繃在框上的皮革或藤編,兩側以外露的螺絲固定在鋼管上。鋼管是拋光的,反射環境的線條。純白背景,正側視角,強調那條連續的線。避免:加上第四支腳、鋼管分段焊接、座面做成厚軟墊、拍成 45 度角看不出懸臂。