Recessed Handles Instead of Surface-Mounted

A handle treatment for an entire cabinet facade. The method is not to attach a ready-made handle to the door panel, but to embed a continuous metal pull channel into the upper edge or side of the door panel—the cross-section is a simple L or C shape, allowing fingers to reach in and open it, with a width equal to the door panel's length. Therefore, from the front, the entire cabinet facade only shows a thin horizontal metal line, rather than a row of protruding handles. The metal is matte champagne gold. This method's material cost is slightly higher than buying handles, but the overall visual integrity is vastly different. A corner of the image shows a comparison with exposed handles: a row of eight metal handles horizontally across the facade, dividing the entire wall into grids. Avoid: making the two versions similar, using exposed long strip handles, making the length of the pull channel not equal to the door panel width, using shiny electroplated metal.

Translated from Chinese by AI.

一整面櫃體的把手處理。做法不是在門片上鎖一支現成的把手,而是在門片的上緣或側邊嵌入一道連續的金屬拉槽——斷面是簡單的 L 或 C 形,手指伸進去就能開,寬度與門片同長。因此從正面看,整面櫃體只有一道細細的水平金屬線,而不是一排突出的把手。金屬是霧面香檳金。這種做法的材料成本比買把手高一點,但視覺的整體感差很多。畫面一角以外露把手的做法作對照:一排八支金屬把手橫在立面上,把整面牆切成一格一格。避免:讓兩者相似、使用外露的長條把手、讓拉槽的長度不等於門片寬度、使用亮面電鍍的金屬。