Lighting Redesign: Louvered Facade Changed to Internal Backlighting

Based on the attached image of a facade with louvers lit from the front, change to internal backlighting: Remove all lights shining on the louver surfaces, and move the light source into the cavity between the louvers and the main structure, shining onto the inner wall. Thus, the louvers themselves become dark silhouettes, with only their edges subtly highlighted; light seeps out from each gap, forming dense vertical fine lines, making the entire building appear like a lightbox with an internally glowing, externally wrapped facade. Through the gaps, the illuminated inner wall and the depth of the cavity should be visible. Color temperature should be warm white. Keep unchanged: The material, spacing, and divisions of the louvers, the building's massing, surrounding environment, and camera angle must remain completely untouched. Avoid: Retaining light that illuminates the louver surfaces, exposing light fixtures, depicting the light from the gaps as a continuous surface, adding colored light.

Translated from Chinese by AI.

依附圖被正面打亮的格柵立面,改為由內背光:移除所有朝格柵表面照射的燈,把光源改到格柵與主結構之間的空腔內、朝內牆打光。因此格柵本身變成深色剪影,只有邊緣被輕微勾亮;光從每一道縫隙中滲出,形成密集的垂直細光線,整棟建築像一個內部發光、外部包覆的燈箱。透過縫隙可以看見內部被照亮的牆面與空腔深度。色溫暖白。保持不變:格柵的材質、間距與分割、建築量體、周邊環境、拍攝視角完全不動。避免:保留照亮格柵表面的光、讓燈具外露、把縫隙的光畫成連續面、加入彩色光。